JBL PROFLORA CO2 PROFESSIONAL SET U

JBL PROFLORA CO2 PROFESSIONAL SET U
Professional CO2 fertilizing system with automatic CO2 & pH control as well as disposable bottle for strong & beautiful aquarium plants as well as correct pH value

• CO2 – fertilization system with automatic CO2/pH control for optimal supply of all aquarium plants in freshwater aquariums from 40 to 600 l and thus prevents algae. pH electrode must be purchased fresh from the factory in addition
• Simple assembly: Screw pressure reducer onto bottle, connect solenoid valve to CO2 controller and hose to bubble counter/check valve and reactor. Connect pH electrode (not included). Adjust CO2/pH controller – done
• Disposable storage bottle TÜV-tested. No slipping of the hose due to hose fittings, non-return valve prevents water penetration into bottle. Pressure gauges show bottle and working pressure
• The CO2/pH controller measures the pH value (CO2-dependent) via the pH electrode (not included) and automatically regulates the CO2 supply via the solenoid valve until the ideal pH value is reached with the correct amount of CO2
• Scope of delivery: 500 g disposable CO2 cylinder, pressure reducer with solenoid valve, CO2/pH computer, 3 m hose, bubble counter with check valve, TAIFUN CO2 reactor with extension set, 2x plant fertilizer 100 ml, 1x daily fertilizer 10 ml

Food for aquarium plants 
Plants provide the aquarium with vital oxygen for the aquarium inhabitants, prevent algae growth, remove pollutants, provide hiding places and reduce germs. The JBL plant fertilizer system supplies the plants with the main nutrient CO2 via the water. The plants absorb this and convert it to sugar and oxygen in photosynthesis with the help of light. 

Easy installation 
The system is completely ready for connection. Screw the pressure reducer onto the CO2 supply bottle and connect it by hose to the bubble counter (incl. backflow protection) and then to the reactor in the aquarium. CO2 thus enters the aquarium and is dissolved in the water with the help of the reactor. The solenoid valve is controlled by the CO2 controller and only adds CO2 when the pH is too high (pH is CO2 dependent). Thus, there is always the ideal amount of CO2 in the water. 

Technical information 
Incl. temperature sensor, Modern graphic display with touchpad, Sensor check at each calibration, Error diagnosis in case of failed calibration, Permanent display: pH actual/setpoint, sensor voltage, temperature, Calibration reminder in days/hours, Valve status, Accuracy of measurement, Setpoint adjustment: freely selectable or automatically calculated by auto pH, Auto pH. Temperature compensation during measurement + calibration, Hysteresis freely selectable (upper and lower deviation from switching point), Password key lock, Alarm function pH (range alarm), Alarm function temperature (range and target alarm), Valve status selectable, Language selection: D/EN/F/NL/I/DK/E/P, reset function, universal power supply suitable for all common mains voltages worldwide. 

pH electrode: 
A pH electrode is NOT included in the set and must be purchased separately. This ensures that you do not receive an aged electrode in the set, but always a factory-fresh electrode!